AutoCAD Practice drawings for Circular Array ~ Ourengineeringlabs

AutoCAD Practice drawings for Circular Array

Also Read

AutoCAD offers powerful tools that simplify creating and editing designs. In this post, we’ll focus on Circle, Array, Circular Array, and Trim commands. These commands will help you craft complex designs quickly and efficiently. Don’t forget to download the practice drawings at the end and check out the work request details for personalized design solutions!

1. Circle Command

The Circle command is one of AutoCAD’s essential tools for creating precise circles.

How to Use the Circle Command:

Type CIRCLE or C in the command bar and press Enter.
Choose your creation method:
- Center, Radius: Specify the center and radius.
- Center, Diameter: Define the center and diameter.
- 2-Point or 3-Point: Create a circle through two or three points.
Press Enter to complete.

Tip: Use Object Snaps (F3) for alignment precision.

2. Array Command

The Array command duplicates objects in a specific pattern. You can create linear, circular, or path-based arrays.

How to Use the Array Command:

Type ARRAY in the command bar and press Enter.
Select the objects to include in the array and press Enter.
Choose the array type: Rectangular, Polar, or Path.
Set the required parameters (e.g., number of items, spacing).
Press Enter to finish.

3. Circular Array (Polar Array)

The Circular Array arranges objects in a circular pattern around a specified center point.

How to Use the Circular Array Command:

Type ARRAY or POLAR ARRAY in the command bar and press Enter.
Select the object(s) to array and press Enter.
Specify the center point for the array.
Set parameters like the number of items and angle of rotation.
Preview the array and press Enter to confirm.

Tip: Use dynamic input to visualize the array as you define the parameters.

4. Trim Command

The Trim command allows you to cut unnecessary parts of objects, refining your designs.

How to Use the Trim Command:

Type TRIM or TR in the command bar and press Enter.
Select the cutting edges. Press Enter.
Click on the parts of objects to remove.
Press Enter to finish.

Tip: Hold the Shift key to temporarily switch to the Extend command while using Trim.

Looking for Design Help?

Hi there, I’m Yernaidu B, a 3D designer and AutoCAD expert. If you need assistance with drafting, array patterns, or custom designs, I’d be happy to help!

Faster turnaround: First draft delivered in 1 hour, and after review and approval of the draft, the full task will proceed.

Let’s work together to create something exceptional!

Keep practicing, and stay tuned for more AutoCAD tutorials!

Comments

Fluid mechanics VIVA QUESTIONS and ANSWERS

1. Define density? Ans: It is defined as the ratio of mass per unit volume of the fluid. 2. Define viscosity? Ans: It is defined as the property of fluid which offers resistance to the movement of fluid over another adjacent layer of the fluid. 3. Differentiate between real fluids and ideal fluids? Ans: A fluid, which is in-compressible and is having no viscosity, is known as ideal fluid while the fluid, which possesses viscosity, is known as real fluid. 4. What is a venturimeter? Ans: It is a device which is used for measuring the rate of flow of fluid flowing through pipe. 5. What is a notch? Ans: A notch is a device used for measuring the rate of flow of a fluid through a small channel or a tank. 6. Define buoyancy? Ans: When a body is immersed in a fluid, an upward force is exerted by the fluid on the body. This upward force is equal to the weight of the fluid displaced by the body. 7. Define meta-centre? Ans: It is defined as the point about which a body...

Complete post >>

TIN SMITHY & Sheet metal

TIN SMITHY Introduction : Many engineering and house articles such as boxes, cans, funnels, ducts etc. are made from a flat sheet of metal. The process being known as tin smithy. For this the development of the article is first drawn on the sheet metal, then cut and folded, to form the required shape of the article. Allowance should be given in the drawing stage for folding and bending. This allowance depends upon the radius of the bend and thickness of the sheet metal. Sheet Metal Materials : A variety of metals are used in a sheet metal shop such as galvanized Iron, black, Iron, tin, Stainless Steel, copper and Aluminium. Hand Tools : The common hand tools used in sheet metal work are steel, try square, Wire gauge, Scriber, Ball peen hammer, Nylon Mallet, Snips Divider, Stakes, Cutting plier and Soldering Iron. Here, the details of tools that are being equipped by our workshop purpose only are presented. Wire Gauge: The thickness of sheet is referred in numbers known ...

Complete post >>

SINGLE ‘V’ BUTT JOINT

Experiment No.: Date: SINGLE ‘V’ BUTT JOINT Aim: To prepare a single ‘V’ Butt Joint as per dimensions given in the sketch. Material Required: Mild Steel plates: 80mm X 40mm X 6mm = 2 Nos Mild Steel electrode ¢ 3.15 mm Equipment required: A.C. Transformer with all welding accessories like Electrode holder, cables. Tool Required: Steel rule 300mm Scriber 150mm Flat file 300mm Try square 200mm Flat Tong 450mm Chipping hammer 200mm Ball peen hammer 750mm Wire brush Welding screen Sequence of Operations: 1. Marking 2. Filing 3. Welding 4. Finishing Procedure: Take two Mild steel plates of size 80mm X 40mm X 6mm. Fix the wor...

Complete post >>

Welding-LAP JOINT

Ex. No : Date : LAP JOINT Aim To join the given two work pieces as a lap joint by arc welding. Material used Mild Steel plates. Tools required Welding power supply Flat file Welding rod Chipping hammer Electrode holder Wire brush Gloves and apron Earthing clamps Shield and goggles Procedure The given workpieces are thoroughly cleaned, i.e. rust, scales are removed and the edges are filed. The electrode is held in an electrode holder and ground clamp is clamped to the welding plates and the power is supplied. The workpieces are positioned on the table to form a “Lab joint”. The tag weld is done on the both the ends of joining plates to avoid the m...

Complete post >>

Welding VIVA question and answers

VIVA QUESTIONS : Q1: Define welding? Ans: Welding is a fabrication process that joins two or more materials, typically metals or thermoplastics, by melting and fusing them together using heat or pressure. Q2: What is the typical thickness of MS Plate used in general welding workshop experiments? Ans: The thickness of the MS (Mild Steel) plate used in general welding workshop experiments can vary depending on the specific requirements of the experiment. However, commonly used thicknesses range from 3 mm to 12 mm. Q3: What is the common job material used in welding experiments? Ans: The common job material used in welding experiments is mild steel. It is widely available, affordable, and relatively easy to work with, making it suitable for various welding applications and practice. Q4: What is the main function of an electrode in welding? Ans: The main function of an electrode in welding is to carry the electric current necessary for the welding process and to ...

Complete post >>

Isometric drawings for practice in AutoCAD

What is Isometric Drawing? Isometric drawing is a method of visually representing three-dimensional objects in two dimensions. It allows for a clear and comprehensive depiction of complex structures by keeping the scale consistent and eliminating distortion. Isometric drawings use a 30-degree angle from the horizontal in all three axes (X, Y, and Z), creating a pseudo-3D effect where the height, width, and depth are equally foreshortened. Creating Isometric Drawings in AutoCAD AutoCAD provides tools and settings that make creating isometric drawings straightforward. Here’s a step-by-step guide: Step 1: Set Up Isometric Snap/Grid 1. Enable Isometric Snap/Grid: - Type `SNAP` in the command line and press `Enter`. - Type `Style` and press `Enter`. - Choose `Isometric` and press `Enter`. 2. Switch Between Isoplanes: - Type `F5` or `CTRL+E` to toggle between the top, right, and left isoplanes. Step 2: Draw Isometric Circles and Arcs 1. Isom...

Complete post >>

Carpentry Viva Questions

Q1: Define carpentry? Ans: Carpentry is a skilled trade that involves working with wood to construct, install, and repair structures and objects. It encompasses various tasks such as measuring, cutting, shaping, joining, and finishing wood to create functional and aesthetically pleasing products. Q2: What are the various types of wood material used in carpentry? Ans: The various types of wood materials used in carpentry include softwoods (such as pine, fir, cedar, and spruce) and hardwoods (such as oak, maple, mahogany, and walnut). Other wood materials used in carpentry can include plywood, particleboard, MDF (medium-density fiberboard), and engineered wood products like laminated veneer lumber (LVL) and oriented strand board (OSB). Q3: What is the sequence of operations in carpentry? Ans: The sequence of operations in carpentry typically involves planning and design, material selection and preparation, measuring and marking, cutting and shaping, joinery or fasteni...

Complete post >>

Sheet metal Funnel making

Making a Funnel using metallic sheet Making a Funnel using metallic sheet Aim:- To make a funnel from a given (GI)metallic sheet. Tools Required:- MALLET, SNIP, STAKE, STEEL RULE, BALL PEEN HAMMER, STRAIGHT EDGE, RIVETS, SCRIBER Procedure: The size of the given sheet metal is checked for its dimensions using a steel rule The required development of surface is being made on the white paper which is overlapped on the sheet metal. The marking is done on the sheet metal as per the development being done on the paper. Now using straight snips, unwanted materials are removed. Now fold and bend the workpiece to make the funnel shape and joint is made on the workpieces. Then using a groover, a locked grooved joint is made for about 5mm. Also, hemming is done in the bottom of the funnel. In between top face and bottom face, a butt joint is made using a solder. Finally, trimming and finishing operations are carried out. Safety Precautions:- Each cut you make exposes s...

Complete post >>

Welding introduction

WELDING Introduction : Welding is a process of joining two similar or dissimilar metals by the application of heat with or without application of pressure and addition of filler material. The welding is extensively used in manufacturing industry, construction industry and maintenance work, replacing riveting and bolting, to a greater extent. The various welding processes are 1. Electric arc welding 2. Gas welding 3. Thermit welding 4. Resistance welding and 5. Friction welding However only electric arc welding is discussed here. In this process, the work pieces are melted along a common edge, to their melting point and then a filler metal is introduced to form the joint on solidification. The materials to be welded must be free from rust, scale oil or other impurities, so as to obtain a sound weld. Arc Welding: In arc welding, the heat required for joining the metals is obtained from an electric arc. Transformers or motor generator sets are used as arc welding ma...

Complete post >>

SMITHY Shop Tools

Smithy (Forging) Shop Tools: Smith’s Forge or Hearth : It is used for heating purpose during the forging operation . The structure of hearth is made of cast iron or cast steel. It has four-legged support, an hearth known as bottom, a chimney along with hood. An opening is also provided on the rear side of the structure to supply the air into the furnace.The hearth is covered by fire bricks lining.For quenching purpose, a water tank is also provided in front side of forge. Air under pressure is supplied to the furnace by the blower. List of tools used in forging shop (1) Fullers (Pair is required) (2) Swages (Pair is required) (3) Flatter (4) Set Hammer (5) Chisels (6) Punch and Drift (7) Drifts Anvil: The anvil forms a support for black smiths work when hammering. The body of the Anvil is made of mild steel with a tool steel face welded on the body but the beak or horn used for bending curve is not steel faced. The round hole in the Anvil called ...

Complete post >>

OurEngineeringLabs

Search This Blog