Skip to main content

Question and Answers about Drawing and Editing - Day 3

Also Read


Q1: How can you use appropriate values when responding to prompts in AutoCAD?
Ans: When responding to prompts in AutoCAD, it is important to provide accurate and appropriate values. This can include entering precise measurements, angles, coordinates, or other numerical values that are required to complete the command or operation.

Q2: What are some basic viewing methods in AutoCAD?
Ans: AutoCAD provides various viewing methods to help you navigate and visualize your drawing. Some basic viewing methods include:
  • Zoom: Allows you to magnify or reduce the view of the drawing.
  • Pan: Lets you move the view within the drawing area.
  • Orbit: Enables you to rotate the view around a selected point or axis.
  • Zoom Extents: Adjusts the view to display the entire drawing within the drawing area.
Q3: How can you draw objects using the LINE command in AutoCAD?
Ans: To draw objects using the LINE command in AutoCAD, follow these steps:
  • Type "LINE" in the command line or click on the Line tool in the Draw toolbar.
  • Specify the starting point of the line by clicking on a point in the drawing area.
  • Specify the endpoint of the line by clicking on another point.
  • Repeat steps 2 and 3 to draw additional lines, or press Enter to finish the LINE command.
Q4: What are some point entry methods in AutoCAD?
Ans: AutoCAD offers several point entry methods to specify precise locations or distances. Some common point entry methods include:
  • Absolute coordinates: Enter the exact X, Y, and Z values of a point.
  • Relative coordinates: Specify distances and angles relative to the last point.
  • Polar coordinates: Specify distances and angles using a distance and an angle from a reference point.
  • Object snaps: Use predefined points on existing objects as reference points for new objects.
Q5: How can you create selection sets using various selection options in AutoCAD?
Ans: AutoCAD provides various selection options to create selection sets. Some options include:
  • Window selection: Drag a selection window from left to right to include objects within the window.
  • Crossing selection: Drag a selection window from right to left to include objects crossing the window boundary.
  • Fence selection: Draw a freehand polyline around the objects to include them in the selection set.
  • Object selection: Select individual objects by clicking on them.
Q6: How can you apply basic drawing aids in AutoCAD?
Ans: AutoCAD offers various drawing aids to assist in accurate and precise drawing. Some basic drawing aids include:
  • Grid: Displays a grid of evenly spaced dots or lines to help align objects.
  • Snap: Snaps the cursor to specific points on the grid or objects.
  • Ortho: Restricts cursor movement to horizontal and vertical directions.
  • Polar Tracking: Allows you to draw lines at specific angles relative to a base angle.
Q7: What is the purpose of the ERASE command in AutoCAD?
Ans: The ERASE command in AutoCAD is used to delete selected objects from the drawing. By using the ERASE command, you can remove unwanted or incorrect geometry and clean up your drawing.

Q8: How can you undo and redo actions in AutoCAD?
Ans: To undo the last action in AutoCAD, you can use the UNDO command or press Ctrl + Z on the keyboard. To redo an action that was undone, you can use the REDO command or press Ctrl + Y.

Q9: What does the OOPS command do in AutoCAD?
Ans: The OOPS command in AutoCAD is used to restore the most recently erased objects. It can be helpful when you accidentally delete objects and want to recover them quickly.

Q10: How can you create selection sets using different selection options in AutoCAD?
Ans: AutoCAD provides various selection options to create selection sets. Some options include:
  • Window selection: Select objects by enclosing them within a rectangular window.
  • Crossing selection: Select objects that cross or touch the selection window.
  • Fence selection: Select objects by drawing a freehand shape around them.
  • Object selection: Select individual objects by clicking on them.
Q11: How can you use different values when responding to prompts in AutoCAD?
Ans: In AutoCAD, you can use various types of values when responding to prompts. These can include numerical values for distances or angles, specific coordinates for positioning objects, or even keywords or options for selecting specific settings or actions.

Q12: What are some basic methods for adjusting the view in AutoCAD?
Ans: AutoCAD provides several methods for adjusting the view of your drawing. Some basic methods include:
  • Zooming in and out using the Zoom command or zoom tools.
  • Panning the view to navigate within the drawing area.
  • Orbiting the view to rotate and view the drawing from different angles.
  • Adjusting the view using the ViewCube or Navigation Bar.
Q13: How can you draw objects using the LINE command in AutoCAD with specific lengths or angles?
Ans: To draw objects with specific lengths or angles using the LINE command in AutoCAD, you can use various techniques. These include:
  • Using the @ symbol followed by a distance to specify a relative distance from the previous point.
  • Using the @ symbol followed by an angle to specify a polar coordinate.
  • Snapping to existing objects or reference points to align the line with specific angles or lengths.
Q14: What are some basic drawing aids in AutoCAD and how can they assist in drawing?
Ans: AutoCAD offers various drawing aids to assist in the drawing process. Some basic drawing aids include:
  • Grid: Helps align objects by displaying a grid of evenly spaced dots or lines.
  • Snap: Allows you to snap the cursor to specific points on the grid or objects for precise positioning.
  • Ortho: Restricts cursor movement to horizontal or vertical directions, ensuring straight lines.
  • Polar Tracking: Enables drawing lines at specific angles relative to a base angle, aiding in accurate placement.
Q15: How can you create selection sets using different options in AutoCAD?
Ans: AutoCAD provides several selection options to create selection sets based on different criteria. Some options include:
  • Window selection: Selecting objects within a rectangular window.
  • Crossing selection: Selecting objects that cross or touch a rectangular window.
  • Polygonal selection: Selecting objects within a polygonal shape.
  • Object selection: Selecting individual objects by clicking on them.
  • Absolute coordinates: Entering the exact X, Y, and Z values of a point.
  • Relative coordinates: Specifying distances and angles relative to the last point.
  • Polar coordinates: Specifying distances and angles using a distance and an angle from a reference point.
  • Object snaps: Using predefined points on existing objects as reference points for new objects.
Q16: What is the purpose of the ERASE command in AutoCAD?
Ans: The ERASE command in AutoCAD is used to delete selected objects from the drawing. It allows you to remove unwanted or incorrect geometry and clean up your drawing.

Q17: How can you use the UNDO and REDO commands in AutoCAD?
Ans: The UNDO command in AutoCAD allows you to undo the last action performed, reverting the drawing to its previous state. The REDO command is used to redo an action that was undone using the UNDO command. Both commands can be accessed from the ribbon, toolbar, or by using keyboard shortcuts.

Q18: How can you create selection sets using various selection options in AutoCAD?
Ans: AutoCAD provides multiple selection options to create selection sets. Some options include:
  • Window selection: Dragging a selection window from left to right to include objects within the window.
  • Crossing selection: Dragging a selection window from right to left to include objects crossing the window boundary.
  • Fence selection: Drawing a freehand polyline around the objects to include them in the selection set.
  • Object selection: Selecting individual objects by clicking on them.
Q19: How can you adjust drawing properties such as units and limits in AutoCAD?
Ans: To adjust drawing properties in AutoCAD, follow these steps:
  • Access the Drawing Setup dialog box by clicking on the Application menu > Drawing Utilities > Drawing Setup.
  • In the Drawing Setup dialog box, you can specify the units for length, angle, and other measurements.
  • You can also set drawing limits to define the visible area within the drawing.
  • Once you have made the necessary changes, click OK to apply the new drawing properties.
Q20: How can you use appropriate values when responding to prompts in AutoCAD?
Ans: When responding to prompts in AutoCAD, it is important to provide accurate and appropriate values. This can include entering precise measurements, angles, coordinates, or other numerical values that are required to complete the command or operation.

Q21: What are some basic viewing methods in AutoCAD?
Ans: AutoCAD provides various viewing methods to help you navigate and visualize your drawing. Some basic viewing methods include:
  • Zoom: Allows you to magnify or reduce the view of the drawing.
  • Pan: Lets you move the view within the drawing area.
  • Orbit: Enables you to rotate the view around a selected point or axis.
  • Zoom Extents: Adjusts the view to display the entire drawing within the drawing area.
Q22: How can you draw objects using the LINE command in AutoCAD?
Ans: To draw objects using the LINE command in AutoCAD, follow these steps:
  • Type "LINE" in the command line or click on the Line tool in the Draw toolbar.
  • Specify the starting point of the line by clicking on a point in the drawing area.
  • Specify the endpoint of the line by clicking on another point.
  • Repeat steps 2 and 3 to draw additional lines, or press Enter to finish the LINE command.
Q23: What are some point entry methods in AutoCAD?
Ans: AutoCAD offers several point entry methods to specify precise locations or distances. Some common point entry methods include:
  1. Absolute coordinates: Enter the exact X, Y, and Z values of a point.
  2. Relative coordinates: Specify distances and angles relative to the last point.
  3. Polar coordinates: Specify distances and angles using a distance and an angle from a reference point.
  4. Object snaps: Use predefined points on existing objects as reference points for new objects.
Q24: How can you create selection sets using various selection options in AutoCAD?
Ans: AutoCAD provides various selection options to create selection sets. Some options include:
  • Window selection: Drag a selection window from left to right to include objects within the window.
  • Crossing selection: Drag a selection window from right to left to include objects crossing the window boundary.
  • Fence selection: Draw a freehand polyline around the objects to include them in the selection set.
  • Object selection: Select individual objects by clicking on them.
Q25: How can you ensure that you are using appropriate values when responding to prompts in AutoCAD?
Ans: You can ensure the use of appropriate values in AutoCAD by carefully reading the prompts and entering the correct numerical measurements or specific instructions.

Q26: What are some basic viewing methods in AutoCAD?
Ans: Some basic viewing methods in AutoCAD include zooming in and out, panning, rotating the view, and using the different visual styles to change the display of the drawing.

Q27: How can you draw a line using the LINE command in AutoCAD?
Ans: To draw a line using the LINE command in AutoCAD, you can start by typing "LINE" in the command line, then specify the starting and ending points of the line by entering coordinates or using point entry methods.
  • Describe one point entry method that can be used in AutoCAD.
  • One point entry method in AutoCAD is the polar coordinates method, where you specify a distance and angle from a reference point to define a new point.
Q28: How can you use basic drawing aids in AutoCAD to create accurate drawings?
Ans: Basic drawing aids such as grid, snap, ortho mode, polar tracking, and object snaps help align and position objects accurately in AutoCAD, ensuring precise drawings.

Q29: What is the purpose of the ERASE command in AutoCAD?
Ans: The ERASE command in AutoCAD is used to delete selected objects or entities from the drawing.

Q30: How can you undo an action in AutoCAD?
Ans: To undo an action in AutoCAD, you can use the "UNDO" command or press Ctrl + Z on the keyboard to reverse the last operation performed.

Q31: What is the purpose of the U command in AutoCAD?
Ans: The U command in AutoCAD is a shortcut for the "UNITS" command. It allows you to quickly access and modify the drawing units.

Q32: How can you redo an action in AutoCAD?
Ans: To redo an action in AutoCAD, you can use the "REDO" command or press Ctrl + Y on the keyboard to reapply the last undone operation.

Q33: What is the purpose of the OOPS command in AutoCAD?
Ans: The OOPS command in AutoCAD allows you to restore the most recently erased object within the current editing session.

Q34: How can you create a selection set of objects in AutoCAD using the Window selection option?
Ans: To create a selection set using the Window selection option in AutoCAD, you can click and drag the cursor from left to right to enclose objects entirely within the selection window.
  • Describe the Crossing selection option in AutoCAD.
  • The Crossing selection option in AutoCAD allows you to select objects that cross or intersect a selection window drawn from right to left.

Q35: What is the purpose of the Fence selection option in AutoCAD?
Ans: The Fence selection option in AutoCAD allows you to create a polyline or a freehand line to define a selection boundary. Objects that cross or touch the fence are selected.

Q36: How can you create a selection set of all objects in the drawing using the Select All option?
Ans: To create a selection set of all objects in the drawing using the Select All option in AutoCAD, you can type "SELECT" in the command line and press Enter. Then, type "ALL" and press Enter again.

Q37: How can you apply the Zoom tool to view a specific area of the drawing in AutoCAD?
Ans: To apply the Zoom tool in AutoCAD, you can click the Zoom tool icon in the Navigation bar or use the Zoom command and specify the desired magnification level or specify a window to zoom in on.

Q38: How can you use the Pan tool to move the view within the drawing area in AutoCAD?
Ans: To use the Pan tool in AutoCAD, you can click the Pan tool icon in the Navigation bar or use the Pan command. Then, drag the cursor to move the view in the desired direction.

Q39: How can you draw a rectangle using the LINE command in AutoCAD?
Ans: To draw a rectangle using the LINE command in AutoCAD, you can specify the starting point and draw each side of the rectangle by entering coordinates or using point entry methods.
  • Describe the Relative Coordinates point entry method in AutoCAD.
  • In AutoCAD, the Relative Coordinates point entry method allows you to specify points relative to the last point entered. You can use the "@" symbol followed by the X and Y distances from the previous point.
Q40: What is the purpose of the Grid drawing aid in AutoCAD?
Ans: The Grid drawing aid in AutoCAD helps create and align objects based on a grid of evenly spaced dots or lines displayed in the drawing area.

Q41: How can you enable the Grid in AutoCAD?
Ans: To enable the Grid in AutoCAD, you can use the "GRID" command or right-click on the Grid button in the Status Bar and select "Display Grid."

Q42: What is the purpose of the Ortho mode in AutoCAD?
Ans: The Ortho mode in AutoCAD restricts cursor movement to horizontal and vertical directions, allowing you to draw lines or objects perfectly aligned with the X and Y axes.

Q43: How can you enable the Ortho mode in AutoCAD?
Ans: To enable the Ortho mode in AutoCAD, you can press the F8 key on the keyboard or click the Ortho button in the Status Bar.

Q44: What is the purpose of Polar Tracking in AutoCAD?
Ans: Polar Tracking in AutoCAD helps you draw lines or objects at specified angles relative to a base point or in relation to existing entities.

Q45: How can you enable and configure Polar Tracking in AutoCAD?
Ans: To enable and configure Polar Tracking in AutoCAD, you can press the F10 key on the keyboard or click the Polar Tracking button in the Status Bar. Then, specify the desired angle increments.

Q46: What is the purpose of Object Snaps in AutoCAD?
Ans: Object Snaps in AutoCAD allow you to precisely locate points on existing objects, such as endpoints, midpoints, intersections, and centers, for accurate object creation and modification.

Q47: How can you enable and configure Object Snaps in AutoCAD?
Ans: To enable and configure Object Snaps in AutoCAD, you can right-click on the Object Snap button in the Status Bar and select the desired object snap modes or press the F3 key on the keyboard.

Q48: How can you draw a circle using the LINE command in AutoCAD?
Ans: To draw a circle using the LINE command in AutoCAD, you can specify the center point and radius or diameter of the circle by entering coordinates or using point entry methods.

Q49: What is the purpose of the ERASE command in AutoCAD?
Ans: The ERASE command in AutoCAD is used to remove selected objects or entities from the drawing.

Q50: How can you undo an action in AutoCAD?
Ans: To undo an action in AutoCAD, you can use the "UNDO" command or press Ctrl + Z on the keyboard to revert the most recent operation.

Q51: What is the purpose of the U command in AutoCAD?
Ans: The U command in AutoCAD is a shortcut for the "UNITS" command. It allows you to quickly access and modify the drawing units.

Q52: How can you redo an action in AutoCAD?
Ans: To redo an action in AutoCAD, you can use the "REDO" command or press Ctrl + Y on the keyboard to reapply the most recently undone operation.

Q53: What is the purpose of the OOPS command in AutoCAD?
Ans: The OOPS command in AutoCAD is used to restore the most recently erased object within the current editing session.

Q54: How can you create a selection set of objects in AutoCAD using the Window selection option?
Ans: To create a selection set using the Window selection option in AutoCAD, you can click and drag the cursor from left to right to enclose objects entirely within the selection window.
  • Describe the Crossing selection option in AutoCAD.
  • The Crossing selection option in AutoCAD allows you to select objects that cross or intersect a selection window drawn from right to left.

Q55: What is the purpose of the Fence selection option in AutoCAD?
Ans: The Fence selection option in AutoCAD allows you to create a polyline or a freehand line to define a selection boundary. Objects that cross or touch the fence are selected.

Q56: How can you create a selection set of all objects in the drawing using the Select All option?
Ans: To create a selection set of all objects in the drawing using the Select All option in AutoCAD, you can type "SELECT" in the command line and press Enter. Then, type "ALL" and press Enter again.

Q57: How can you use the Zoom In option in AutoCAD to focus on a specific area of the drawing?
Ans: To use the Zoom In option in AutoCAD, you can type "ZOOM" in the command line and press Enter. Then, specify the base point for the zoom and enter a zoom factor greater than 1.

Q58: How can you use the Zoom Out option in AutoCAD to view a larger area of the drawing?
Ans: To use the Zoom Out option in AutoCAD, you can type "ZOOM" in the command line and press Enter. Then, specify the base point for the zoom and enter a zoom factor less than 1.

Q59: What is the purpose of the Pan command in AutoCAD?
Ans: The Pan command in AutoCAD allows you to move the view within the drawing area without changing the magnification level.

Q60: How can you use the Pan command in AutoCAD to navigate the drawing?
Ans: To use the Pan command in AutoCAD, you can type "PAN" in the command line and press Enter. Then, specify the displacement distance or use the mouse to drag the view in the desired direction.

Q61: How can you draw a polygon using the LINE command in AutoCAD?
Ans: To draw a polygon using the LINE command in AutoCAD, you can specify the center point, radius, and number of sides of the polygon. Then, use the endpoint of each side to draw the polygon.
  • Describe the Absolute Coordinates point entry method in AutoCAD.
  • The Absolute Coordinates point entry method in AutoCAD allows you to specify points based on exact X, Y, and Z coordinates in the drawing.
Q62: What is the purpose of the Snap mode in AutoCAD?
Ans: The Snap mode in AutoCAD allows you to specify precise points by snapping the cursor to predetermined locations, such as endpoints, midpoints, intersections, and centers.

Q63: How can you enable and configure the Snap mode in AutoCAD?
Ans: To enable and configure the Snap mode in AutoCAD, you can right-click on the Snap button in the Status Bar and select the desired snap modes or press the F9 key on the keyboard.

Q64: What is the purpose of the Polar Tracking mode in AutoCAD?
Ans: The Polar Tracking mode in AutoCAD allows you to draw lines or objects at specified angles relative to a base point or existing entities.

Q65: How can you enable and configure the Polar Tracking mode in AutoCAD?
Ans: To enable and configure the Polar Tracking mode in AutoCAD, you can press the F10 key on the keyboard or click the Polar Tracking button in the Status Bar. Then, specify the desired angle increments.

Q66: What is the purpose of the Object Snap Tracking feature in AutoCAD?
Ans: The Object Snap Tracking feature in AutoCAD allows you to extend object snaps beyond their default locations, enabling precise object alignment and creation.

Q67: How can you enable and use Object Snap Tracking in AutoCAD?
Ans: To enable Object Snap Tracking in AutoCAD, you can press the F11 key on the keyboard or click the Object Snap Tracking button in the Status Bar. Then, specify the desired tracking points and distances.

Q68: What is the purpose of the Selection Cycling feature in AutoCAD?
Ans: The Selection Cycling feature in AutoCAD allows you to cycle through overlapping objects and select the desired one when multiple objects are present at the same location.

Q69: How can you enable and use Selection Cycling in AutoCAD?
Ans: To enable Selection Cycling in AutoCAD, you can type "SELECTIONCYCLING" in the command line and press Enter. Then, set the value to 1 to enable it. When selecting objects, you can press the Ctrl key to cycle through the available options.



Comments

Post a Comment

Recent posts

Fluid mechanics VIVA QUESTIONS and ANSWERS

1. Define density? Ans: It is defined as the ratio of mass per unit volume of the fluid. 2. Define viscosity? Ans: It is defined as the property of fluid which offers resistance to the movement of fluid over another adjacent layer of the fluid. 3. Differentiate between real fluids and ideal fluids? Ans: A fluid, which is in-compressible and is having no viscosity, is known as ideal fluid while the fluid, which possesses viscosity, is known as real fluid. 4. What is a venturimeter? Ans: It is a device which is used for measuring the rate of flow of fluid flowing through pipe. 5. What is a notch? Ans: A notch is a device used for measuring the rate of flow of a fluid through a small channel or a tank. 6. Define buoyancy? Ans: When a body is immersed in a fluid, an upward force is exerted by the fluid on the body. This upward force is equal to the weight of the fluid displaced by the body. 7. Define meta-centre? Ans: It is defined as the point about which a body
14 comments
Complete post >>

Welding VIVA question and answers

VIVA QUESTIONS : Q1: Define welding? Ans:  Welding is a fabrication process that joins two or more materials, typically metals or thermoplastics, by melting and fusing them together using heat or pressure. Q2: What is the typical thickness of MS Plate used in general welding workshop experiments? Ans:  The thickness of the MS (Mild Steel) plate used in general welding workshop experiments can vary depending on the specific requirements of the experiment. However, commonly used thicknesses range from 3 mm to 12 mm. Q3: What is the common job material used in welding experiments? Ans:  The common job material used in welding experiments is mild steel. It is widely available, affordable, and relatively easy to work with, making it suitable for various welding applications and practice. Q4: What is the main function of an electrode in welding? Ans:  The main function of an electrode in welding is to carry the electric current necessary for the welding process and to provide filler mate
4 comments
Complete post >>

Carpentry Viva Questions

Q1: Define carpentry? Ans:  Carpentry is a skilled trade that involves working with wood to construct, install, and repair structures and objects. It encompasses various tasks such as measuring, cutting, shaping, joining, and finishing wood to create functional and aesthetically pleasing products. Q2: What are the various types of wood material used in carpentry? Ans:  The various types of wood materials used in carpentry include softwoods (such as pine, fir, cedar, and spruce) and hardwoods (such as oak, maple, mahogany, and walnut). Other wood materials used in carpentry can include plywood, particleboard, MDF (medium-density fiberboard), and engineered wood products like laminated veneer lumber (LVL) and oriented strand board (OSB). Q3: What is the sequence of operations in carpentry? Ans:  The sequence of operations in carpentry typically involves planning and design, material selection and preparation, measuring and marking, cutting and shaping, joinery or fastening, assembly,
1 comment
Complete post >>

Welding-LAP JOINT

Ex. No :                                                                              Date : LAP JOINT Aim To join the given two work pieces as a lap joint by arc welding. Material used Mild Steel plates. Tools required Welding power supply  Flat file Welding rod Chipping hammer Electrode holder Wire brush Gloves and apron Earthing clamps Shield and goggles Procedure The given workpieces are thoroughly cleaned, i.e. rust, scales are removed and the  edges are filed. The electrode is held in an electrode holder and ground clamp is clamped to the  welding plates and the power is supplied. The workpieces are positioned on the table to form a “Lab joint”. The tag weld is done on the both the ends of joining plates to avoid the movement of  workpieces during welding. The welding is carried throughout the length of the workpieces on both sides by  maintaining 3mm gap between plates and the welding rod. The welded plates are allowed f
7 comments
Complete post >>

Coordinate systems in AutoCAD

World Coordinate System (WCS), User Coordinate System (UCS). There is 4 AutoCAD coordinates system you should know. Absolute coordinate system , Relative Rectangular coordinate system, Relative Polar coordinate system and Interactive system(Direct coordinate system). Absolute Coordinate system: Absolute Coordinates uses the Cartesian System to specify a position in the X, Y, and (if needed) Z axes to locate a point from the 0-X, 0-Y, and 0-Z (0,0,0) point. To locate a point using the Absolute Coordinate system, type the X-value, Y-value, and, if needed, the Z-value separated by commas (with no spaces). Syn: Enter LINE command: L [Enter] Start line at point A: 0,0 [Enter] End first line at point B: 2,2 [Enter] End of second line at point C: 2,3 [Enter] Examples shown bellow. Relative Rectangular Coordinate system: After first points entered, your next points can be entered by specifying the next coordinate compare/relative f
Post a Comment
Complete post >>

Drill Press Parts Diagram and Their Functions

Drill press is one of the best tools that are used to provide efficient services to the people. Unlike hand drill, the orientation and the location of the holes are considered accurately. All the functions and the features of the drill press are performed well, if all the parts of the tools are in the right condition and working properly. Drill press parts diagram better explain the functions performed as every part of the drill press has a unique and separate function. The parts of the drill press include head, sleeve, spindle, column, table and base. Following are some of the parts of the drill press along with their functions: Head The head part of the drill press houses the spindle as it is attached at the top region of the spindle. It is responsible for the spindle movement because the spindle can only move upward or downward. Spindle Spindle is the most important part of the drill press that is used to hold the tool and is responsible for its rotation. The spindle of t
7 comments
Complete post >>

MOULD WITH SPLIT PATTERN

Ex. No :                                                                                       Date : MOULD WITH SPLIT PATTERN Aim To make the mould for the given split pattern. Material required •  Moulding board •  Riser pin •  Moulding box •  Sprue pin •  Green sand •  Rammer •  Trowel •  Lifter •  Riddle •  Draw spike •  Gate cutter  •  Bellow •  Vent rod  Procedure 1. Place the moulding board on a horizontal surface. 2. The drag box is placed above the moulding board. Now one piece      of pattern is kept at  center of the drag as shown in figure. 3. The parting sand is spread before we keep the pattern. 4. Facing sand is sprinkled over the pattern to a depth of 2mm. then      greensand is filled  over it. 5. Proper ramming is done on the green sand to get a air free                  packing. 6. Excess sand is remove with strike off bar. 7. The drag is inverted upside down. 8. The cope box is place over the drag box. 9.
2 comments
Complete post >>

TIN SMITHY & Sheet metal

TIN SMITHY Introduction : Many engineering and house articles such as boxes, cans, funnels, ducts etc. are made from a flat sheet of metal. The process being known as tin smithy. For this the development of the article is first drawn on the sheet metal, then cut and folded, to form the required shape of the article. Allowance should be given in the drawing stage for folding and bending. This allowance depends upon the radius of the bend and thickness of the sheet metal. Sheet Metal Materials : A variety of metals are used in a sheet metal shop such as galvanized Iron, black, Iron, tin, Stainless Steel, copper and Aluminium. Hand Tools : The common hand tools used in sheet metal work are steel, try square, Wire gauge, Scriber, Ball peen hammer, Nylon Mallet, Snips Divider, Stakes, Cutting plier and Soldering Iron. Here, the details of tools that are being equipped by our workshop purpose only are presented. Wire Gauge: The thickness of sheet is referred in numbers known
5 comments
Complete post >>

Lathe machine introduction

STUDY OF LATHE Aim To study about the lathe . Introduction                        Lathe is called the father of machine tools. The main function of lathe is to remove  metals from work piece to give a required shape and size. In the lathe the work piece is held in a chuck. The tool is moved at an angle 90_ to the axis. Various operations such as straight turning, taper turning, and chamfering, facing, knurling, grooving, thread cutting, taper turning are carried out. When the operations above set are done automatically, then the lathe is called automatic lathe. Working principle of lathe                       In a lathe, the workpiece is held in chuck and rotates about its axis by means of power. A  single point cutting tool is mounted in tool post. When the chuck rotated the work piece also rotated. The tool moves parallel to the axis of rotation of work piece to produce a cylindrical surface, where as the tool moves perpendicular to the work piece to pro
5 comments
Complete post >>

Boring operation on lathe machine

Ex. No :                                                                                                         Date : BORING Aim To perform boring on a cylindrical work piece. Material used Mild steel rod. Tools required Lathe Three-jaw chuck Chuck key Vernier caliper Cutting tools Procedure First loosen the jaw in the chuck key to position the work piece, and then tighten the  jaws. Fix the cutting tool in the toolpost. Switch on the lathe and move the carriage near to the workpiece. Give it a small cross  feed, and then move carriage longitudinally to the required length slowly. Bring the carriage to the original position, give a small cross feed and move carriage  longitudinally. Repeat this step until required diameter is obtained. To get smooth surface give a very small feed when the diameter is nearing the  required value. The drill bit is fixed in the tail stock. The hole is made by moving the tailstock through over the bed.
6 comments
Complete post >>

Search This Blog